Hazardous Materials Management Plan


Hazardous Materials Management Plan

The purpose of the Hazardous Materials Management Plan (HMMP) is to describe the proper use, handling and storage practices and procedures to be followed by people working with hazardous materials anywhere on UCCS property to assist in protecting them from potential health and physical hazards presented by hazardous materials present in the workplace, and to keep chemical exposures below specified limits.

It is intended to fulfill the requirements of the following regulations:

  • Hazard Communication Plan – 29 CFR 1910.1200
  • Hazardous Materials Management Plan – Colorado Springs Fire Department

For purposes of this document hazardous materials is defined as any item or agent (biological, chemical, or radiological), which has the potential to cause harm to humans, animals, or the environment, either by itself or through interaction with other factors.

Hazardous materials are defined and regulated in the United States primarily by laws and regulations administered by the U.S. Environmental Protection Agency (EPA), the U.S. Occupational Safety and Health Administration (OSHA), the U.S. Department of Transportation (DOT), and the U.S. Nuclear Regulatory Commission (NRC). Each has its own definition of a "hazardous material."

OSHA's definition includes any substance or chemical which is a "health hazard" or "physical hazard," including: chemicals which are carcinogens, toxic agents, irritants, corrosives, sensitizers; agents which act on the hematopoietic system; agents which damage the lungs, skin, eyes, or mucous membranes; chemicals which are combustible, explosive, flammable, oxidizers, pyrophorics, unstable-reactive or water-reactive; and chemicals which in the course of normal handling, use, or storage may produce or release dusts, gases, fumes, vapors, mists or smoke which may have any of the previously mentioned characteristics. (Full definitions can be found at 29 Code of Federal Regulations (CFR) 1910.1200.)

EPA incorporates the OSHA definition and adds any item or chemical which can cause harm to people, plants, or animals when released by spilling, leaking, pumping, pouring, emitting, emptying, discharging, injecting, escaping, leaching, dumping or disposing into the environment. (40 CFR 355 contains a list of over 350 hazardous and extremely hazardous substances.)

DOT defines a hazardous material as any item or chemical which, when being transported or moved in commerce, is a risk to public safety or the environment, and is regulated as such under its Pipeline and Hazardous Materials Safety Administration regulations (49 CFR 100-199), which includes the Hazardous Materials Regulations (49 CFR 171-180). In addition, hazardous materials in transport are regulated by the International Maritime Dangerous Goods Code; Dangerous Goods Regulations of the International Air Transport Association; Technical Instructions of the International Civil Aviation Organization; and U.S. Air Force Joint Manual, Preparing Hazardous Materials for Military Air Shipments.

The NRC regulates materials that are considered hazardous because they produce ionizing radiation, which means those materials that produce alpha particles, beta particles, gamma rays, x-rays, neutrons, high-speed electrons, high-speed protons, and other particles capable of producing ions. This includes "special nuclear material," by-product material, and radioactive substances. (See 10 CFR 20).

Hazardous Materials Management Plan

Glossary of Hazardous Materials Terms

Classification of Hazardous Materials Hazards

Toxicity and Hazard Exposure

Handling and Storage of Hazardous Materials

Biosafety Management Plan

Hazardous Materials Requiring Prior Approval

Hazardous Materials Requiring Prior Approval with editable form